Coffee Mug Anida Technologies
File: Beer Mug.stl
Name: Beer Mug
PLA Material: 68.06 grams ( 0.15 lbs)
Infill = 10%
Size: 105.45 mm (4.15") x 76.26 mm (3.00") x
81.68 mm (3.22")
Layers: 403 layers
Print Time: 7 hr 38 min
Function: This is a coffee mug. You should be careful putting hot liquids into PLA - perfect for alcoholics that want to carry their gin around the office. For best results, spray this with FDA approved silicone to seal it. The handle is designed so it can be printed without supports. It can be printed at any scale but if you print is 1:1
then it will be about 3" (76mm) around and about
3.2" (82mm) tall.
This work is licensed under the Redpah License.
|BEER MUG.STL||3 MB|