
Christmas Gifts Sergio Lanna
A complete assortment of Christmas gifts (magnets, decorations for the Christmas tree or gift packages, etc. ..) made with 3D printer and laser cutting.
You must rename the filename.ngc.txt files for laser cutting in filename.ngc and the filename.gcode.txt files for different color levels for 3d printing in filename.gcode
.gcode files are setting for: PLA filament with Prusa Mendel i3 clone with 0.4 nozzle.
To change color you can to cause a filament change and to change
the filament or to use separate .gcode files that you can find here.
I strongly recommend printing through separate gcode (one for each
print level), especially if you need to print more than two levels
(colors), because it is a much more precise and reliable method and
because you can print even days away from one level to another (without
removing the part already printed from the print bed)
Only if you use .gcode files:If you do not immediately print the next levels, it is advisable to
heat the print bed, with the previously printed part, for a few minutes
before printing.
ITALIANO
Un completo assortimento di regalini natalizi (calamite, decori per l'albero di natale o per i pacchi regalo, ecc..) realizzati con stampante 3d e taglio laser.
Devi rinominare i file nomefile.txt per il taglio laser in nomefile.ngc e i file nomefile.txt per i livelli a colore diverso per la stampa 3d in nomefile.gcode
I file .gcode sono settati per: Prusa Mendel i3 clone con ugello 0.4
Per cambiare colore puoi causare un cambio filamento e cambiare il filamento oppure realizzare dei files .gcode separati.
Io consiglio caldamente di stampare tramite separati files .gcode (uno per
ciascun livello di stampa), specie se è necessario stampare più di due
livelli (colori), perché è un metodo molto più preciso e affidabile e
perché si può stampare anche a giorni di distanza da un livello
all'altro (senza togliere la parte gia stampata dal letto di stampa)
Solo se usi i file .gcode:
Se non effettui immediatamente la stampa dei livelli successivi, è
consigliabile riscaldare il letto di stampa, con la parte stampata
precedentemente, per qualche minuto prima di procedere alla stampa
Price | $4.99 |
Category | Other |
Purchases | 1 |
Views | 2077 |
Likes | 0 |
Uploaded | 12/19/2018 |
This work is licensed under the Redpah License.
Bear.stl | 405 KB |
Bells 1.stl | 149 KB |
Bells 2.stl | 217 KB |
Christmas tree.stl | 392 KB |
Reinder 1a.stl | 103 KB |
Reinder 1b.stl | 144 KB |
Santa.stl | 308 KB |
Snowyman.stl | 165 KB |
Vischio.stl | 265 KB |
Reinder 2a.stl | 176 KB |
Reinder 2b.stl | 222 KB |
Bells.ngc.txt | 16 KB |
Reinder ball1.ngc.txt | 6 KB |
Reinder ball2.ngc.txt | 15 KB |
XmasTree1_Green.gcode.txt | 1000 KB |
XmasTree2_White.gcode.txt | 232 KB |
XmasTree3_Yellow.gcode.txt | 242 KB |
XmasTree4_Red.gcode.txt | 366 KB |
Bells2_Lev1.gcode.txt | 1 MB |
Bells2_Lev2.gcode.txt | 2 MB |
Reinder1b_Lev1.gcode.txt | 926 KB |
Reinder1b_Lev2.gcode.txt | 884 KB |
Reinder2b_Lev1.gcode.txt | 1 MB |
Reinder2b_Lev2.gcode.txt | 2 MB |
Snowyman1_White.gcode.txt | 634 KB |
Snowyman2_Black.gcode.txt | 257 KB |
Snowyman3_Red.gcode.txt | 196 KB |
Tree1.stl | 85 KB |
Tree2.stl | 118 KB |
Tree2_Lev1.gcode.txt | 737 KB |
Tree2_Lev2.gcode.txt | 1 MB |
Tree1.gcode.txt | 1 MB |
Reinder 1a.gcode.txt | 1 MB |
Reinder 2a.gcode.txt | 2 MB |
Bells 1.gcode.txt | 2 MB |
XmasGifts files descriptions.pdf | 219 KB |
VischioLev1.gcode.txt | 843 KB |
VischioLev2.gcode.txt | 407 KB |
SantaLev1_RED.gcode.txt | 611 KB |
SantaLev2_WHITE.gcode.txt | 488 KB |
SantaLev3_PINK.gcode.txt | 158 KB |
BearLev1-orange.gcode.txt | 761 KB |
BearLev2-Black.gcode.txt | 216 KB |
BearLev3-Red.gcode.txt | 121 KB |
BearLev4-White.gcode.txt | 76 KB |
No comments yet!
Please login or register to write a comment.