Resin Bottle Drainer Stand Anida Technologies

File: BottleDrainer.STL
Name:  Resin Bottle Drainer Stand
Material: 143.89 grams ( .317 lbs)
Infill = 10%
Size: 168.58mm (6.64") x 124.33 mm (4.89") x 69.09 mm (2.72")
Resolution: 0.20mm
Layers: 351 layers
Print Time: 13 hr 46 min
Function: Here's my second fixture to help support my resin printer.  This is a resin bottle draining stand.  It is constructed of filament printed 
eight filament printed parts and some 80/20 extrusions.  The stand can be used three ways.  First, the stand can do what its name states and allows 250mg to 1000g bottles to drain into the vat.  Second, the stand can allow the bottle to drain into its own cap.  Third, the base makes a great temporary mount for a vat to protect the clear FEP bottom during leveling and other operations.  This model is supports the Mars Elegoo and Anycubic vats.  You need to print these 1:1.  You will also need a 10", 2X 6", and 2X 3.75" long aluminum extrusion commonly known as 80/20 that is 1"x1" (McMaster-Carr part number 47065T101 or equiavlent) and have both ends tapped for #1/4-20 x 1" or M6x25 flat head screws.  Good Luck!   
Meta Keywords: Resin Bottle Drainer Stand Printer Mars Elegoo Anycubic VAT

Price $3.00
Category DIY
Purchases 0
Views 1645
Likes 1
Uploaded 03/6/2020

This work is licensed under the Redpah License.

Bottle Drainer.STL 557 KB
Note: if you want to re-download a file, please do so from your Purchases page or the product page. Download links are set to expire. You might get an error if you try to re-download a file from your browser's downloads page.


No comments yet!

Please login or register to write a comment.