MASK AGAINST COVID 19 TPU Mistermade

MASK PROTECTION AGAINST THE COVID 19 FULLY PRINTED, WHICH HAS THE FOLLOWING ADVANTAGES:-MAKE A PERFECT SEAL ADAPTING TO THE FACE, ENVITATING THE AIR IN.-AVOID ODORS DUE TO SWEAT, AS IT IS EASY TO WASH AND THE MATERIAL DOES NOT ABSORB MOISTURE-IT'S VERY ERGONOMIC, AS IT FITS THE FACE AND YOU CAN USE IT ON YOUR EARS OR NECK-IT HAS TWO THREADED AIR IN INPUTS, IN WHICH FILTERS MADE OF FACE CLEANING CLOTHS ARE HOUSED, WHICH ARE INTERCHANGEABLE FOR GREATER PRACTICALITY AND CLEANING.-IT HAS A DEFORMABLE NOSE CLIP IN HOT WATER (80 C), MADE IN PLA, WHICH ACHIEVES AN IDEAL ADAPTATION, TO AVOID FOGGING IN THE GLASSES.-EASY TO ELABORATE-IF YOU LIKE MY WORK, I APPRECIATE YOUR SUPPORT =)3D PRINT PARAMETERSPART: FILTER MASK
APPROXIMATE WEIGHT: 17 Grams
INFORMATION:
PRINTING PARAMETERS
PROPOSED MATERIAL: TPU
SUGGESTED TEMPERATURE: 217 ° NOZZLE / 60 ° BED
SUGGESTED SPEED: 20 mm / s
LAYER / NOZZLE: 0.2-0.25 / 0.4-0.5
FAN: 100%
HORIZONTAL EXPANSION: -0.1
SUPPORTS: NOT APPLICABLE
FILLING: 10% + NO IRONING
PERIMETERS: 5
ADDITIONAL REMARKS: THE FLAT PIECE IS PRINTED TO LATER BE FASTENED.PART: CAP FILTER
APPROXIMATE WEIGHT: 4 Grams
INFORMATION:
PRINTING PARAMETERS
PROPOSED MATERIAL: PLA
SUGGESTED TEMPERATURE: 217 ° NOZZLE / 60 ° BED
SUGGESTED SPEED: 20 mm / s
LAYER / NOZZLE: 0.2 / 0.4
FAN: 100%
HORIZONTAL EXPANSION: -0.15
SUPPORTS: NOT APPLICABLE
FILLING: 15% + NO IRONING
PERIMETERS: 3
ADDITIONAL REMARKS: NONEPART: NOSE CLIP
ATTACHED PLAN
APPROXIMATE WEIGHT: 2 Grams
INFORMATION:
PRINTING PARAMETERS
PROPOSED MATERIAL: PLA
SUGGESTED TEMPERATURE: 217 ° NOZZLE / 60 ° BED
SUGGESTED SPEED: 20 mm / s
LAYER / NOZZLE: 0.2-0.25 / 0.4-0.5
FAN: 100%
HORIZONTAL EXPANSION: 0
SUPPORTS: NOT APPLICABLE
FILLING: 15% + WITH IRONING
PERIMETERS: 5
ADDITIONAL OBSERVATIONS: THE FLAT PIECE IS PRINTED TO LATER DEFORM WITH HOT WATER, AND ADAPT TO THE SHAPE OF THE NOSE.PART: STRAP MASK
ATTACHED PLAN
APPROXIMATE WEIGHT: 3 Grams
PENDING REFERENCE IMAGE
STL
INFORMATION:
PRINTING PARAMETERS
PROPOSED MATERIAL: TPU
SUGGESTED TEMPERATURE: 217 ° NOZZLE / 60 ° BED
SUGGESTED SPEED: 18 mm / s
LAYER / NOZZLE: 0.2-0.25 / 0.4-0.5
FAN: 100%
HORIZONTAL EXPANSION: 0
SUPPORTS: NOT APPLICABLE
FILLING: 15% + IRONING
PERIMETERS: 5
ADDITIONAL REMARKS: DOES NOT APPLY