
Skeleton fpv BD Bosca3D
3 inch fpv drone powered by 2S batteries. Even this model does not involve any difficulty in printing even for the less experienced. With a simple and lightweight design the drone turns out to be a lot of fun to fly. All projects are tested as can be seen from the flight test photos and video.Link video test: https://youtu.be/AzpfB2hBdP4
Required material:
- 1 connector XT60
- 4 screw M2x5 (for frame)
- 2 screw M2x6 (for support XT60)
- 2 screw M2x5 (for support camera)
Print settings for PLA
- nozzle temperature: 195°
- plate temperature: 55°
- infill: 50%
- support: no
Print settings for PETG
- nozzle temperature: 230°
- plate temperature: 55°
- infill: 50%
- support: no
Components:
- camera: foxeer razer nano 1200tvl
- flight controller: jhemcu ghf420aio f4 osd
- motor: racestar 1103 br1103b
- vtx: mini txt5848 48ch 5.8g
- buzzer: hglrc ws2812
- proppeler: gemfan hurricane 3018
- battery: zop power 7.4v 850mah
Price | $3.00 |
Category | Hobby |
Purchases | 0 |
Views | 854 |
Likes | 0 |
Uploaded | 06/6/2021 |
This work is licensed under the Redpah License.
P001-TELAIO.stl | 487 KB |
P002-SUPPORTO CAMERA.stl | 70 KB |
P003-CANOPY.stl | 676 KB |
P004-SUPPORTO XT60.stl | 59 KB |
Note: if you want to re-download a file, please do so from your Purchases page or the product page. Download links are set to expire. You might get an error if you try to re-download a file from your browser's downloads page.
No comments yet!
Please login or register to write a comment.