
Bi-generator wind turbine esposcar
We are presenting a new wind turbine device, that is easy to 3d print,
it can be made handcraft once it is viewed it components and how they
get assembled in a very easy and intuitive view, This system have
several pending patents and the device presented here, is just one model
more from others that are available in our next crowdfunding campaign.
*A new stl files has been updated with the name of ExtendExtensor.stl that consist of a turbine extension unit that can be linked with other extension units, so the turbine diameter can be extended more in case there is few wind available and you are using the 2 generators in the device.We will begin by placing all the elements required for building this
wind turbine including links for where to buy at very competitive price
the DC motors that will work as generators and the bearings.
- The number of bearings that are needed for the device are 13 units (8x22x7) and can be found at very affordable prices at AliExpress & Amazon.
- The DC motor used is a Hilitand 31ZY 24V/3.500RPM permanent magnet and there are 2 links where it can be found. Please have in consideration that the total cost is reduced if you get several units instead of one at AliExpress & Amazon.
This
Bi-Generator VAWT have simple printable parts and it is very easy to
assemble. In any case there is a bunch of 3d pics that helps visually
step by step to assemble all the components of the device. In any case,
there is a more detailed description step by step available at instructables for assembly of this device if you want to take a look. Below I leave some video links of the device in action and of the multi-stage generator system that is the main reward in the crowdfunding campaign.- Vertical wind turbine multi-generator device in action!!
- Top RPM
- Voltage Test
It can be build at a much lower cost an array of this vertical wind
turbines that are able to delivered from 20 watts to a maximum as 100
watts each VAWT depending of the amount of DC motors-generators &
turbine blades type used (2 motors per VAWT for maximum wattage is
required). If there is not much wind, the number of generators per unite
can be reduced to one.
VERY IMPORTANT UPDATESIt is important
to mention that the type of filaments that must be used are different
for each item of the device. For the none moving parts a PLA filament
would do right and for the moving elements like gears or turbine blades
the ideal filament goes from ABS, Nylon to poly-carbonate due to
friction, wind etc.
- A new stl files has been updated with the name of ExtendExtensor.stl that consist of a turbine extension unit that can be linked with other extension units, so the turbine diameter can be extended more in case there is few wind available and you are using the 2 generators in the device.
- Another important update has been done. There is a new stl file that is a shaft linker between the small gear and another smaller dc motor (uxcell RF-500TB-12560 DC5V-12V 2300RPM-5600RPM) to be used in case there is not a lot of wind available therefor allowing the turbines to spin much more easily. The stl files have the name,
*UpdateUxcell RF-500TB-Holder *UpdateSmallGearUxcell RF-500TB-ShaftLinker*SmallGearGeneratorShaftLinkerPerfectFit
(There was an error in the diameter of the hole for the motor 31ZY
shaft fit) It is fixed.NEW GEARS RANGE 3x1 If
there is few wind as might be in cities etc, it has been developed a
gear system 3x1 so the rpm of the motors shaft will be lower therefore
taking less load. This is ideal for regions where the wind do not blow
strong.This gear range system is applied to both dc motor Uxcell RF-500TB-12560 DC5V-12V 2300RPM-5600RPM & Hilitand 31ZY*SmallGearGeneratorRange3-1Linker *SmallGearRange3-1*BigGearRange3-1
Price | Free |
Category | DIY |
Downloads | 2961 |
Views | 458 |
Likes | 1 |
Uploaded | 10/9/2022 |
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
MainGearRange3-1.stl
(188 KB) |
View 3D Render Download |
SmallGearRange3-1.stl
(85 KB) |
View 3D Render Download |
SmallGearGeneratorRange3-1Linker.stl
(38 KB) |
View 3D Render Download |
UpdateSmallGearUxcell RF-500TB-ShaftLinker.stl
(19 KB) |
View 3D Render Download |
SmallGearGenerator31zyShaftLinkerPerfectFit.stl
(19 KB) |
View 3D Render Download |
UpdateUxcell RF-500TB-Holder.stl
(62 KB) |
View 3D Render Download |
TurbineBladeHubStopper.stl
(16 KB) |
View 3D Render Download |
TurbineBladeExtensor.stl
(30 KB) |
View 3D Render Download |
ConventionalBIGTurbineBlade.stl
(42 KB) |
View 3D Render Download |
PendingPatentBIGTurbineBlade.stl
(717 KB) |
View 3D Render Download |
ConventionalSmallTurbineBlade.stl
(39 KB) |
View 3D Render Download |
PendingPatentSmallTurbineBlade.stl
(202 KB) |
View 3D Render Download |
Hub.stl
(231 KB) |
View 3D Render Download |
TopSHaftHubSupport.stl
(68 KB) |
View 3D Render Download |
BottomColumnShaftsSupport.stl
(1 KB) |
View 3D Render Download |
GeneratorHolder.stl
(16 KB) |
View 3D Render Download |
BaseBearingsStructure.stl
(783 KB) |
View 3D Render Download |
MainGearShaftTopHubLinker.stl
(25 KB) |
View 3D Render Download |
MainGearBottomShaft.stl
(24 KB) |
View 3D Render Download |
SmallGearWithNoStopper.stl
(52 KB) |
View 3D Render Download |
SmallGearGeneratorShaftLinker.stl
(23 KB) |
View 3D Render Download |
SmallGearWithBearingStopper.stl
(77 KB) |
View 3D Render Download |
MainGearSupport.stl
(25 KB) |
View 3D Render Download |
MainGear.stl
(204 KB) |
View 3D Render Download |
BaseSupporters.stl
(23 KB) |
View 3D Render Download |
Base.stl
(74 KB) |
View 3D Render Download |
No comments yet!
Please login or register to write a comment.