Bird Feeder James

Here is a very easy-to-put-together bird feeder I designed and printed, enjoy!
Notes for assembly:
Everything will slot together and you should put the pin through one of the slide bars, through the tube, through the bottom piece and then finally out the other end through the second slid bar.
I would recommend using some simple glue or double sided tape to make sure the slide bars stay in place.
After that all you have to do is slide a piece of string through the top hole of the tube, then through the holes on the lid, then back through to the other top hole in the tube with both ends of the string having a knot to keep it in place.

Print settings:
Infill: 10% infill on all models except for the tube where it should be solid with 3 wall perimeters.
Layer height: 0.2mm

Price $2.15
Category Household
Purchases 0
Views 295
Likes 0
Uploaded 02/1/2023

This work is licensed under the Redpah License.

pin.stl 10 KB
top cover.stl 179 KB
bottom.stl 60 KB
slide bar.stl 45 KB
tube.stl 77 KB
Note: if you want to re-download a file, please do so from your Purchases page or the product page. Download links are set to expire. You might get an error if you try to re-download a file from your browser's downloads page.

Comments

No comments yet!

Please login or register to write a comment.