Dickory Clock bok
My version of the Dickory Clock https://youtube.com/shorts/xm-1OsaT2ew?feature=share
This unique clock uses a spiral groove to drive the hour indicator as the minutes turn. Drops down to original 12 o'clock when the indicator reaches the top.
Requires:
-- 1688 type high-torque (or large-torque) clock movement 15mm overall shaft length with brass nut on minute shaft, rubber washer, flat washer and nut for mounting.
Sample unit click here https://bit.ly/3S1G5m2
--2mm diameter round metal rods (brass or stainless steel). Ends should be free of burrs and chamfered to allow for easy insertion.
1 x 170mm +/- 2.0 mm (Slide Rail)
1 x 12mm +/- 0,2mm (Needle)
1 x 50mm (reamer)
Easy to build as printed parts just snap together. Complete build guide is included as well as a video assembly guide https://youtu.be/yf42MSP8er8
PLEASE READ:© 2023
When you purchase the files, you are allowed to print the design for your PERSONAL USE ONLY. You DO NOT have permission to sell or share the digital files and designs in any way, form or manner.
If you would like to sell physical prints, please subscribe for a monthly renewable commercial license on my patreon - www.patreon.com/boksbox
Even with a license to print, I still retain the copyright to the design, and the licensee is NOT allowed to sell or distribute the digital files and designs in any way, form or manner
Price | $3.50 |
Category | Household |
Purchases | 0 |
Views | 239 |
Likes | 0 |
Uploaded | 10/25/2023 |
This work is licensed under the Redpah License.
pin vise 3mm.stl | 117 KB |
pin vise 2mm.stl | 117 KB |
pin vise assembly.pdf | 97 KB |
Assembly Guide redpah.pdf | 3 MB |
face.stl | 823 KB |
drum cap.stl | 246 KB |
drum body.stl | 2 MB |
cover.stl | 115 KB |
base.stl | 182 KB |
indicator.stl | 129 KB |
clock wrench.stl | 31 KB |
No comments yet!
Please login or register to write a comment.